Startalk programming

Posted Posted in Nortel

Quick Reference Guide For Startalk

Configuration (Initial setup)
1 – Feature 983
2 – Pswd = 266344
3 – DN length: = 2 or 3 (matches length of station numbers)
4 – Bilingual = YES or NO
5 – Primary lang = Eng or Spa
6 – Group lists = Y or N
7 – Glist lead dig:9 = OK or CHNG to different leading digit
8 – System config = OK or RETRY to re-enter configuration data
9 – Configuring . . . Wait 5-10 minutes for configuration to complete

Business Status
1 – Feature 982
2 – Pswd: OPERATOR (67372867)
3 – Atdt avail: Y or N if live attendant is available for dial ‘0’ from auto attendant.
4 – Business open: Y or N (If Y then company greetings 1-3, 5-7, 9-11 or 13-15 will play depending on the business schedule. If N then company greeting 4 (Business closed) greeting plays.)
5 – Answer lines: Y or N (Auto attendant answering status.)
6 – Atdt: Press CHNG to change attendant (dial ‘0’ from auto attendant)

read more

Startalk Flash v1-1.7

Posted Posted in Nortel

Quick Reference Guide For

Startalk Flash V1.0-V1.7

Configuration (Initial setup)
1 – Feature 983
2 – Pswd = 266344
3 – Bilingual = YES or NO
4 – Primary lang = Eng or Fre
5 – Group lists = Y or N
6 – Glist lead dig:9 = OK or CHNG to different leading digit
7 – System config = OK or RETRY to re-enter configuration data
8 – Configuring . . . = Wait about 5 seconds for configuration to complete

Business Status
1 – Feature 982
2 – Pswd: OPERATOR (67372867)
3 – Atdt avail: Y or N if live attendant is available for dial ‘0’ from auto attendant.
4 – Business open: Y or N (If Y then company greetings 1-3 or 5-7 will play depending on the business schedule. If N then company greeting 4 or 8 (Business closed) greeting plays.)
5 – Answer lines: Y or N (Auto attendant answering status.)
6 – Atdt: Press CHNG to change attendant DN (dial ‘0’ from auto attendant)

read more

Startalk Flash v1.9-2.1

Posted Posted in Nortel

Quick Reference For Startalk Flash V1.9-V2.1

Activate Feature Codes
1 – Feature 903
2 – Codes: F980-F989 – Press OK
3 – Exit

Configuration (Initial setup)
1 – Feature 983
2 – Pswd = 266344
3 – Serial number is displayed. Press OK
4 – Key: – Press OK
3 – Bilingual = YES or NO
4 – Primary lang = Eng or Fre
5 – Group lists = Y or N
6 – Glist lead dig:9 = OK or CHNG to different leading digit
7 – System config = OK or RETRY to re-enter configuration data
8 – Configuring . . . = Wait about 5 seconds for configuration to complete

read more