Set up System Speed dials on Norstar

Setting up System speed dials is not very hard.

To enter a programming session, follow the next few simple steps:

1) Press FEATURE * * 2 6 6 3 4 4

2) Enter Password: 2 6 6 3 4 4

Display will read: ” Terminals & Sets”

Using the navigation keys, as displayed below, follow the next simple steps:

7310navkeys

3) Press: NEXT

Display will read: “Lines”

4) Press: Next

Display will read: “Services”

5) Press: Next

Display will read: “System Speed Dial”

7) Press: Show

Display will read: “Speed dial #:__”

Hint: Begin your System Speed Dials with “01”

Enter 01 or 02 or 03 etc.

Display will read: System Speed Dial #: 01

8) Press: Show

Display will read: “No number stored”

9) Press the “CHANGE” softkey.

Display will read: “#01:

10) Enter the Speed Dial number

Press the “OK” softkey.

11) Press: NEXT

Display will read: “Use prime line”

12) Press: NEXT

Display will read: “Display digits:Y”

13) Press: NEXT

Display will read: “Bypass restr’n:N”

14) Press: NEXT

Speed dial 01 has now been programmed:

To program another Speed Dial Number, repeat steps 6 thru 14.

Print Friendly, PDF & Email