Reset Security Passwords in IP Office

Passwords can be reset to default values via the RS232 (DTE) Maintenance port on the back of the IP Office.

DTE Port Settings:

  • Access to the DTE port requires a (straight) serial cable between your PC/Laptop and the IP Office.
  • Configure PuTTY, HyperTerminal, etc, for serial as follows: 38,400 – 8 – N – 1 – None – VT100

Procedure:

Enter the following commands (in bold) when the IPOffice is running normally. (Do no press ESC during startup!):

Press ESC key... 
at
OK
at-securityresetall
Enter "00E007092AD5" to continue     (the LAN1 port MAC address is displayed)
00E007092AD5                         (enter the number displayed above)
OK
at-debug
Tue 25/2/2014 14:50:48, Hello>reboot

Note: You can reboot the IP Office either from at-debug or the Manager program – Advanced menu.

After the system reboots, you should be able to login with the default passwords.

Default Service Users:

Name Password Role Rights Group
Administrator Administrator These are the default accounts used for system configuration using the IP Office Manager application. Administrator, Customer Admin, System Status Group.
Manager Manager Customer Admin, Manager, System Status.
Operator Operator Customer Admin, Operator, System Status.
EnhTcpaService EnhTcpaPwd1 This account is used for one-X Portal for IP Office connections to the system. TCPA Group.
SCN_Admin This account is used for multiple system configuration using the Small Community Network Management features. Administrator Group, System Status Group.
IPDECTService This account is used for DECT R4 system provisioning via an IP DECT trunk. IPDECT Group.
SMGRB5800Admin SMGRB5800Admin This account is used for web based configuration services. SGMR Admin
secureuser secureuser Security Admin
BusinessPartner BusinessPartner BusinessPartner
service service Maintainer
security securitypwd This account is used for creating service Users thru the Manager > Security settings. Maintainer
Print Friendly, PDF & Email